NOTE: Fasteners have switched to Torx drive as detailed in the Blog
Trench Digger 3: the most reliable, set it and forget plate
bindings on the market. The standard model shown here uses the classic toe clip and heel bail interface.
Features include:
- Adjustable lift/cant options to accommodate personal preferences
in setup
- Adjustable levels of stiffness via different stiffness E-Rings
- Bomb-proof, made in America durability.
For boot sole length 260
and under, (for Raichle/Deeluxe and Head boots, this is a 22) you will need to
follow these instructions. The largest the binding will
accomodate is a sole length of 313 (approx mondo 29). If you are a mondo 29 or
larger, or your boot length is longer than a 313, we have a long
base plate as an option. All you need to do is make note of such in the
comments section when checking out.
If you are using this on
a Boiler Plate (or any plate system) and would like the lower version of the
cant disk, center disk, and e-ring choose the BP version. If you are not using
a plate system, choose the Traditional Version.
The BP version was not designed to be used without a plate system.
Mounting it directly onto a board is done at your own risk and not recommended
by Bomber.
What's the difference?
Helpful Binding Articles
Traditional or BP - What's the difference?
For help in selecting E-Rings, go here.
For help in selecting cant disks, go here.
[ITEMPRICE]