FS: Coiler AM 172 and Volkl Coal 167

[boyracer]

For sale, older fiberglass Coiler AM 172cm, flex 7.9. Sidewall reads "172 AMW 06GT1-7.9" Very small mark on the base, 1x5mm. $250

Volkl Coal BX board, 167cm some chips on the topsheet at the tip/tail and two filled spots on the base. $75


The RT in the middle is sold.

Boards are in Calgary, Alberta.

[Carve99]

I will take the coal. I am also in Calgary. email me at trentandchris at shaw.ca

[retronaut]

let me know if the coal falls through.
i am in west toronto.

thanks,

paul

[srodeo]

I am also interested in coal. if it does not fall thru

[boyracer]

I will take the coal. I am also in Calgary. email me at trentandchris at shaw.ca

E-mail sent!

[Allee]

Interested in the Coiler, but I'm thinking that a 7.9 flex is a little stiff for my 150lb. Do you know what weight it was built for?

[Williamcarve]

I'm very interested in the Coiler too! Put me on the list. I'm in Montreal...

[ibrussell]

I have a WCC 175RC20 06RM1 7.4 built for 180# not for sale

[boyracer]

Interested in the Coiler, but I'm thinking that a 7.9 flex is a little stiff for my 150lb. Do you know what weight it was built for?

Built for 180lbs, which I actually weigh. I find it too stiff for my style of mostly riding off the groomed cord. Could bring it to SSV some time, to try it?

Williamcarve, your on the list! will let you know.

And the Coal is sold.

[Allee]

If you find it too stiff then it's going to beat me around for sure. I'd want it for mixed conditions.

Willemcarve, all yours ...

[boyracer]

I'm very interested in the Coiler too! Put me on the list. I'm in Montreal...

So If your still interested in that Coiler let me know, my email is in my profile. I can ship it next week.