New New board porn 2012

[WinterGold]

Hello Pius,
I still haven´t ridden a Full Carve, but this might have been a good choice! I´m eager to hear your feedback ...

I have already been to the glacier to test my knee. It held up very well! So I´m hoping for a good season. At the moment it is too warm here and the glaciers are overcrowded ...

[Mxjas38]

Donek Saber:
Length 169cm
Waist Width 27cm
VSR
Maryland Flag Custom Topsheet.

Now I just need some snow

[Randy Kight]

163
23ww
KST = 7.8 - 11.0 - 8.8
TD3 Sidewinders Yellow E-Ring Blue E-Pads

Been staring at this thing since last April. Look forward to finally giving it a go.



Randy

[slopestar]

163
23ww
KST = 7.8 - 11.0 - 8.8
TD3 Sidewinders Yellow E-Ring Blue E-Pads

Been staring at this thing since last April. Look forward to finally giving it a go.



Randy

That looks fun!

[Randy Kight]

That looks fun!

I told Mr. Kessler that was exactly what I wanted...FUN Carving Machine. He told me he knew exactly what I was after, so...spec'd to my 230 lbs, lower angles and desire to carve the mountain a new rump hole...this is what came in the mail...

[slopestar]

I told Mr. Kessler that was exactly what I wanted...FUN Carving Machine. He told me he knew exactly what I was after, so...spec'd to my 230 lbs, lower angles and desire to carve the mountain a new rump hole...this is what came in the mail...

I am looking for a softboot quiver killer myself...we will see after this winter though. Mr Martin will be getting my order this summer...Enjoy that beauty!

[Jack Michaud]

Never tried an SG before...



Care of the Bomber Store!!

20.3cm waist, 11.8m tail raidus, 20mm taper, and stiff!

My trinity is complete - 163, 170, 185.

[kieran]

Never tried an SG before...

i tried willow15's earlier this year. same size, older model. it was über-damp and mega turny.

[Jeffrey Day]

Hey Jack,
Nice flowery decor! Did you pick that out! J/K Jack! Nice SG! I'm sure you'll ride the snot out of it! Enjoy!

[Ear dragger]

oh jack! you will be pleased!

[Jack Michaud]

So the board came with a brochure, and they only list a single radius number, 11.8m. I'm assuming this means the tail radius, and that SG's have a VSR/clothoid/scrumtrulescent sidecut shape like Kessler.... yes??

[piusthedrcarve]

So the board came with a brochure, and they only list a single radius number, 11.8m. I'm assuming this means the tail radius, and that SG's have a VSR/clothoid/scrumtrulescent sidecut shape like Kessler.... yes??

SCR info. is not on the catalog. But on SG website, the published SCR is AVG. of 3 different progressive radii. ......and yes but different geometry.

[CarvingScooby]

So the board came with a brochure, and they only list a single radius number, 11.8m. I'm assuming this means the tail radius, and that SG's have a VSR/clothoid/scrumtrulescent sidecut shape like Kessler.... yes??

Ooh that look so SXY What's the waist?

Jack, Looking forward for the full report...

Enjoy the snow,
RT

[Jack Michaud]

Ooh that look so SXY What's the waist?

Jack, Looking forward for the full report...

Enjoy the snow,
RT

20.3cm, see above!

[Miltie]

Jack, I have the SG 163 Full Race from last year. It is a sweet ride. You will definitely enjoy yours. I believe the sidecut is a VSR. Looking at the SG Japan site it only lists one radius as well. Think it is the radius in the tail section. Have fun!! Tom

Scooby the waist is 20.3 cm.

[CarvingScooby]

20.3cm, see above!

Doh!Thx Concentrate on board and forget about anything else

Cheers
RT

[lowrider]

Nice board Jack but you will only be riding half of it if you don't ride it with a plate!

[pokkis]

You might able steal one ProTeam version from here:
http://www.extremecarving.com/forum/...hp?f=13&t=9379

[Jack Michaud]

Nice board Jack but you will only be riding half of it if you don't ride it with a plate!

I have a Boiler Plate. I'll try it on the SG, but I'm pretty sure it's going to live on my 185.

You might able steal one ProTeam version from here:
http://www.extremecarving.com/forum/...hp?f=13&t=9379

No difference between the ProTeam and the Full Race T other than graphics. jsyk.

[mc-alex]

the sg boardsale in the thread are my ones. i have made a new thread in the sales category as well.

[Surf Quebec]

Nice board !
I can't wait for your report, I ride a 2009 of the same model, but did not ride many boards, so can't compare.
Only that it's the stiffest board I've ridden, been reading somewhere on BOL that the 2010 and 2011 are a bit softer.

[WinterGold]

Jack, I hope you made the right decision ...

The given radius is an average of different radii, so it is not the tail radius in particular. But I found with the SG boards that the differences between the radii in the separate sections of the board is not as big as with certain other companies. But it is still VSR.

Here are mine for this season ... 163 and 185 ...

[Jack Michaud]

Awesome. Just curious why you sprung for the pro team graphics...?

[WinterGold]

To be part of the team !

No seriously, there is no reasonable cause behind it. I liked the graphics a bit better than the normal version and you only live once.

There is also no reasonable cause why my sneakers are so expensive or why my Goretex Pro Shell jacket costs as much as a good snowboard ...

[piusthedrcarve]

Here are mine for this season ... 163 and 185 ...

Whoo-Ah Gerald,
Be Creative for once. You just got what you had last year.

[WinterGold]

You´re absolutely right !

I thought the same thing, but tell me what to do? I already tried Kessler and Apex. Since the Black Pearls are made in Japan now, they are pretty hard to get (not that they were easy to get before).

But let´s see what the future will bring ...

[kieran]

You´re absolutely right !

I thought the same thing, but tell me what to do? I already tried Kessler and Apex.

oxess .. sense .. virus.

[WinterGold]

I don´t want to step down a notch ... ... Ups, did I say that out loud ?

(Just joking ... although the World Champion is riding ... no, no ... just a joke!!!)

[Jack Michaud]

To be part of the team !

No seriously, there is no reasonable cause behind it. I liked the graphics a bit better than the normal version and you only live once.

There is also no reasonable cause why my sneakers are so expensive or why my Goretex Pro Shell jacket costs as much as a good snowboard ...

No judgment here my friend! Live it up!

[Emdee406]

My Race Quiver for 2012...love 'em all!


Oxess 158 SBX, SG 157 and unridden as yet, SG PRO 180-just waiting for second Vist plate!
As soon as my legs are ready and the rest of the Hill opens....I'll ride that big bad boy!