New New board porn 2012

[pokkis]

Pokkis, you seem to like Coilers ...

I dont want to spend my limited time on slopes for nothing but best i can get and what is fully built according my taste

My new lovely white Coiler just arvived yesterday and Tinkler plate today
So can not comment anything yet, and due we have here green grass on ground it might take untill January before i have some feedback of Tinkler plate.
That HELMETOR will get some snow next week, but first with BBP

[ti_knee]

The dragon has landed! I'm blown away by the quality of the board and the topsheet came out perfectly. Thanks Bruce! Ride report Sunday if the snow's good.

Full Pic

From Coiler

[pokkis]

Looks to be Christmas on another place too
That looks awesome

[icebiker]

That's a Redline Monocog 29er, great bike, it's my son's, I used to ride one before I got into muni.

Threadjack: I had the identical bike, but toasted it earlier this year in a brain-fart move by driving into the garage with it on the roof. Agree, sweet handling bike. Lot of fun. RIP.

[Hilux]

Ti_Knee...Nice ride! Bruce just sent me a pic of my board too...apparently there were a few just-completed AMT's hanging out together, yours was in the pic too. Quality looks great and nice design!

[icebiker]

The dragon has landed! I'm blown away by the quality of the board and the topsheet came out perfectly. Thanks Bruce! Ride report Sunday if the snow's good.

Full Pic

From Coiler

wow!!!!

[ti_knee]

It looks even better in person. There is a fade from red to orange on the eyes and flowers that doesn't really turn up in the photo.

Hilux, was yours the coffee or the skull? If it's the coffee one, I'm jealous now--total coffee junkie.

[Hilux]

It looks even better in person. There is a fade from red to orange on the eyes and flowers that doesn't really turn up in the photo.

Hilux, was yours the coffee or the skull? If it's the coffee one, I'm jealous now--total coffee junkie.

Mine was the coffee...love the bean The idea came from another board I saw on here last year with the grains of rice (DMC perhaps?) so I thought , "hey I can do that with coffee!" At first I just wanted all beans...then I talked to the graphics guru Stephen Fleck who with a wonderful artistic eye, suggested a few more things and made the rest possible...will post up photos after I get it

I like the contrast in colours on your though and the "coiler" font is awesome! You get the 21cm waist?

[pogokoenig]

I dont want to spend my limited time on slopes for nothing but best i can get and what is fully built according my taste

Pokkis, may I use that as a quotation once in a while?

[pokkis]

PK, sorry, that is protected by trade mark, but we can make nice multi milion deal about licensing of usage of that

[ti_knee]

Mine was the coffee...love the bean The idea came from another board I saw on here last year with the grains of rice (DMC perhaps?) so I thought , "hey I can do that with coffee!" At first I just wanted all beans...then I talked to the graphics guru Stephen Fleck who with a wonderful artistic eye, suggested a few more things and made the rest possible...will post up photos after I get it

I like the contrast in colours on your though and the "coiler" font is awesome! You get the 21cm waist?

I wear a 27 boot, and ride about 55, 53 so opted for the 20 cm. I sent that font to one other member on here, so it might make another appearance on another board.

I just finished an initial tune between writing up a research paper... very therapeutic when one is under the gun! No offense to Chris, but the build quality of the Coiler is superior to my Prior 4wd in every way visually. We'll see how the ride compares, although it's comparing apples and oranges I suppose. I'd be curious to do a back to back of a FLC at some point if anybody in AB has one.

OT: order some coffee from Transcend in Edmonton, 49th Parallel in Vancouver, or Social Coffee (out east somewhere). You'll be blown away. I roast my own now, but all 3 produce some amazing brew!

[slopestar]

Nice ride ti-knee!

[scrapster]

Wow, that really does look amazing. Congrats! Even the faux bamboo totally works. Very subtle.

BTW, I didn't end up using the font, so your board is still unique!

[www.oldsnowboards.com]

Pokkis who makes the plate on the white board?

Mike Tinkler is in production currently. 495$ I believe he is about a month out. Place an order with half down and the rest when completed but prior to shipping of course. I rode one of the final protos end of last season, it worked very well. I look forward to using the final product on one of my favorite Tinklers soon. Final production plates have integrated flex adjustment. This gives additional options of "how much" flex you want and where the "bottom" is, very handy. Bryan

[LaydownKangaroo]

Christmas is all around!

Some new stuff arrived this week

2x Coiler NSR+Asym
1x Oxess XX



Specs:

• Coiler NSR+Asym 182cm: waist 18cm, sidecut 12.7/19m
• Coiler NSR+Asym 189cm: waist 17.5cm, same sidecut
• Oxess Hardcarve XX185 titanal+carbon: waist 15cm, sidecut 13m

[pokkis]

Those cool ptex tops makes them look wider than they are. Nice boards

[www.oldsnowboards.com]

Not mine.

Carbon topsheet on board and plate.

TNT

Snow Stix Inserts

Latest Tinkler Plate

[CarvingScooby]

...Snow Stix Inserts...

...meaning "Stix" build in? How they works if build in?

...Carbon topsheet on board...

Carbon& metal or Carbon only..?

What's the width/specs?

Cool board...

Thx for sharing,
RT

[xy9ine]

my god that carbon tinkie is hot.

[www.oldsnowboards.com]

...meaning "Stix" build in? How they works if build in?
\Carbon& metal or Carbon only..?
What's the width/specs?
Cool board...
Thx for sharing,
RT

Snow Stix inserts installed during construction. Owner did not (yet) purchase the Snow Stix. He wisely chose to have the inserts built into the board.

I just wrote to ask Mike to confirm. My best recall is 180cm length, 19.5cm waist, 10mm taper, 12-24 blended scr.

I have not seen this board in person yet. I hope to this week. If I do I will get some of my own photos of it outdoors if possible. It was built for a local Mt Hood rider. I hope to see it in action very soon. The owner is not a BOL member.

[www.oldsnowboards.com]

I took the other photo in it's high res form, edited the photos out and then re-sized them hopefully allowing greater detail.

[nekdut]

Brian, Is Mike making UPM compatible plates for non-Tinkler boards? Beautiful work overall. That one sounds like a dream.

[www.oldsnowboards.com]

Brian, Is Mike making UPM compatible plates for non-Tinkler boards? Beautiful work overall. That one sounds like a dream.

Yes. As matter of fact the plates will work with UPM AND 4x4 patterns , no additional parts required.

[www.oldsnowboards.com]

My new "Uber Stiff" Tinkler new shape racer has arrived. This is my "Feeling Strong" and "Brave" board. It is the stiffest board I have felt short of my one off Identity blem Carbon Race. Two additional layers of carbon fiber. Hope I am up to it.

It is on the far left in the group photo.

[Miltie]

Brian, That new board and plate combo looks sick! (in a good way) . Nice collection of Tinklers! Hope you have fun on all of them. Tom

[www.oldsnowboards.com]

Brian, That new board and plate combo looks sick! (in a good way) . Nice collection of Tinklers! Hope you have fun on all of them. Tom

Thanks, I definitely do!!

[Hans]

When I see this Tinks pics

Glad I didn't sell my 202 full system. Have to ride that board this season. When I ride the board, always a big grin from ear to ear.

[*Ace*]

Nice group shot! Reminds me of that group photo of all of TVR's Virus boards all lined up.

What is on the counter, take some rips before the pics?

With the super stiff construction on the new board...did you alter the camber, or is it similar to the other Tinklers you own? Just curious because my super stiff Virus has like 35mm of camber!!!

[inkaholic]

Hey Brian,

Sweet looking new rides. Are the 2 bolts just behind the front bindings on the Tinkler Plates for Snow Stix or what? I see some sort of "pad" under the plate in your close up shot. Can you elaborate for us please?

Thanks,
Ink

[tex1230]

What is on the counter, take some rips before the pics?

nice eye, Ace!