Results 1 to 18 of 18

Thread: East Coast mountain recommendation?

  1. #1
    Join Date
    Nov 2003
    Location
    Mammoth, CA
    Posts
    712

    East Coast mountain recommendation?

    I'm looking for a place on the east coast (drivable from Boston) for a few days of carving. Last winter I went to Stowe the night before the dumping (Jan 4) and loved it (except for the first day, since I was totally ill-equipped for waist deep powder). It was double-extra-cool that Burton was having their annual company outing at the same time, since most of the people were great riders and friendly people. I even saw a few people carving **on snowdecks**!

    Anyway, I'm looking for another place to go. I'd like to avoid southern VT (Okemo, Stratton, Mt Blow, etc) since I'm there almost every weekend of the season. I'd also like to avoid SugarLoaf since I'll be there for ECES, and possibly in Dec as well since I have a friend who lives there.

    I was thinking of giving Mt Tremblant a go. This would probably be in early Jan, so I know it would be cold. How would the conditions be? How is the mountain? Good for carving? Is there a decent nightlife?

    Any other recs for where to go?

  2. #2
    Join Date
    Nov 2003
    Location
    Montréal, QC
    Posts
    1,526

    Re: East Coast mountain recommendation?

    Originally posted by mirror70
    I was thinking of giving Mt Tremblant a go. This would probably be in early Jan, so I know it would be cold. How would the conditions be? How is the mountain? Good for carving? Is there a decent nightlife?

    Any other recs for where to go?
    Tremblant is very highly overrated in my opinion, it's overdevelopped, very artificial. Add to this lots of people and long lines. And mountainwise, I don't like the layout, lots of flats where you have to skate. For carving, I'd recommend Ste-Anne, a little further, but much nicer. And even better is Le Massif, but now where pretty far from where you are.

    Derf

  3. #3
    Join Date
    Nov 2003
    Location
    New York City
    Posts
    134

    Jay Peak maybe?

    I haven't been to Jay Peak since I really started carving, but it's a very nice mountain. They've really done a good job upgrading lifts and such the past few years, and they seem to do a decent job grooming. You'll want to bring a powder board just in case though, when they get dumped on, you'll forget you're on the east coast. Also, if you know the area, you can ride off the backside all the way to the access road and hitchhike back up, but I don't recommend doing that unless you're with someone who knows the way.

    Jeremiah

  4. #4
    Join Date
    Nov 2003
    Location
    Rhode Island
    Posts
    39

    Not Tremblant

    I would also recommend avoiding Tremblant. I was there once, and only found room to carve during a portion of one run in a 3-day period. It's just hoardes of skiers beelining down the hill. I found it quite frustrating.

  5. #5
    Join Date
    Nov 2003
    Location
    Sutton, MA
    Posts
    1,359

    East Mt

    I haven't been to Jay Peak in years, what I recall is that it wasn't really a great carving mountain but it is unbelievable when they get dumped on. I've bee in powder up there up to my waist. I'd give Sugarbush a try it's about the same distance as Stowe but not as crowded a has a good mix of terrain. I am planing on heading up there first week in Dec (if conditions are good) to use my Warren Miller voucher.

    Geoff

  6. #6
    Join Date
    Nov 2003
    Location
    Fort Montgomery NY
    Posts
    66
    Whiteface has some real great steeps. It used to have a small but intense local carving scene. There is also tons of off mountain activities in Lake Placid.

  7. #7
    Join Date
    Nov 2003
    Location
    Mammoth, CA
    Posts
    712
    I'm looking for carving. I got my fill of tree runs when I used to ski, and jsut don't enjoy them on a board.

    So Tremblant isn't worth the drive?

  8. #8
    Join Date
    Nov 2003
    Location
    West side Ridge Mount Cleveland
    Posts
    1,835

    Loon?

    Ja, maybe dis vood verk, ask Ken B, Loon all doe not snow when I went, all mash potatoes, was layed out very well, could see mit snow good den barry good!

    ask other. I like it, same mit Waterville Valley

    Shred till dead!

  9. #9
    Join Date
    Nov 2003
    Location
    Concord, NH
    Posts
    29

    NH Carving

    Loon, Waterville, Sunapee and maybe even Bretton Woods are nice places to carve in NH. Last time I went to Bretton Woods, I though it was not steep enough. Loon is my favorite. There is a small group of carvers there on weekends, plus racers from the Holderness Team. WV also has a small race team that and a few carvers kicking around most weekend days.

    If you want to drive extra far (7 hours), you could check out Mt. Ste. Anne, in Quebec. You could stay in Quebec City for a reasonable price (Manoir Des Remparts in Vieux Quebec is about the cheapest), ride all day and enjoy the bars and restauraunts at night.

    -Ken

  10. #10
    Join Date
    Nov 2003
    Location
    Mammoth, CA
    Posts
    712
    I like the Mt St Anne idea - how far is it from the city?

  11. #11
    Join Date
    Nov 2003
    Location
    Concord, NH
    Posts
    29

    Mt. Ste Anne

    Mt. Ste. Anne is about 1/2 hour from Quebec City. I believe there are also a couple of shops in Beaupre that sell (and possibly rent or demo) carving equipment. I can't recall the names, but I am sure someone else here will know.

  12. #12
    Join Date
    Nov 2003
    Location
    Montréal, QC
    Posts
    1,526
    Mont Ste-Anne is more 45 minutes than 30 minutes from Québec city (depending on traffic and conditions). It's pretty much the mountain where you'll find the most carvers in the province. Québec is 2h30 minutes from Montréal. Tremblant is 2h to 2h30 from Montreal (I never remember). If you're going to Ste-Anne, a day at Le Massif is a must.

    The place to go for carving equipment is
    Ski Bazar André Bouchard
    10950 Bd Ste Anne
    Beaupré, Quebec
    G0A 1E0
    Tel: (418)827-2148
    Email: ski.bazar.andrebouchard@qc.aira.com

    They have ScottUSA boards, Raichle bindings and Deeluxe boots. They also have some used euipment. And from what I heard, are very good bootfitters. But I don't know about renting.

    If your passing by Montreal, stop at Sharks in Laval, it's another shop that actively support carving. http://www.sharksco.com/

    That's pretty much it.

    Derf

  13. #13
    aikidan Guest

    sugarbush!

    I don't particularly like the "shape" of Jay Peak for carving. Sugarbush, on the other hand, has some really nice fun trails. That's my vote. I also like Loon over in NH.

  14. #14
    Join Date
    Nov 2003
    Location
    Waahhtahville, ME
    Posts
    56

    sugarbush

    I'm makin a trip to Sugarbush sometime late in January. so you say the carvings pretty decent? what runs are the best? ill have to find the exact dates and maybe some of us can meet up.

    andrew

  15. #15
    Join Date
    Nov 2003
    Location
    ON, CAN
    Posts
    379
    Route comparison from rand mcnally tripmaker

    Boston - Mt Ste-Anne 427mi
    avoiding Montreal
    via 93,91,55,20,40, 138

    Boston - Tremblant 405mi
    through Montreal
    via 93,89,87, 15

    I prefer MtSte-Anne over Tremblant and they are already open. Tremblant isn't. If you go to Ste-Anne you must go to le Massif. You gotta see it on a clear day and take your camera.

  16. #16
    Join Date
    Nov 2003
    Location
    Boston
    Posts
    28

    Do the Loaf

    Sugarloaf sugarloaf

  17. #17
    Join Date
    Nov 2003
    Location
    Mammoth, CA
    Posts
    712
    I'm going to be there anyway with an ex-CVAer, so I'm looking for other places to go.

  18. #18
    Join Date
    Nov 2003
    Location
    ON, CAN
    Posts
    379
    If you are going to be staying in Quebec City for Mt Ste-Anne and Le Massif another place to check out is Stoneham. short drive north of city
    Can't provide comment, never been there yet but they have hosted World Cup PGS and PSL.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •