Dan
January 27th, 2006, 12:30 AM
I have a brand-spanking new Rossignol Race X VAS, 160 cm that I'd like to trade for bindings. I'm looking for either Cateks or Bombers, short plate for a 27 cm boot, and prefer standard bail but would consider Intecs.
High-res pics of the board: <a href="http://www.gamingjapan.net/images/RossiTop.jpg">top</a> and <a href="http://www.gamingjapan.net/images/RossiBase.jpg">base</a>.
If those links don't work, try these lower res shots hosted on photobucket: http://i47.photobucket.com/albums/f161/danonbol/RossiTop.jpg and http://i47.photobucket.com/albums/f161/danonbol/RossiBase.jpg
I had to take the board out of its shrink wrap to take these photos. As you might expect, it's in brand-new condition and has never even had bindings mounted. There is light rust on the edges, but an edge tune should take care of it. The base is also a little dry - I will travel wax before sending, which should help.
<u>Specs (as printed on topsheet)</u>
Length: 1600 mm
Waist width: 190 mm
Running length: 1370 mm
BOL member Ladia provided a few more measurements (thanks Ladia!): <br>Sidecut radius 10.7m
Tip width 237mm
Tail width 235mm
Would make a great slalom deck for a smaller racer, or maybe a freecarver for crowded weekend days at your local hill. I was tempted to keep it, but this spot in my quiver is already filled.
Questions? Post here or hit me by e-mail.
Thanks!
High-res pics of the board: <a href="http://www.gamingjapan.net/images/RossiTop.jpg">top</a> and <a href="http://www.gamingjapan.net/images/RossiBase.jpg">base</a>.
If those links don't work, try these lower res shots hosted on photobucket: http://i47.photobucket.com/albums/f161/danonbol/RossiTop.jpg and http://i47.photobucket.com/albums/f161/danonbol/RossiBase.jpg
I had to take the board out of its shrink wrap to take these photos. As you might expect, it's in brand-new condition and has never even had bindings mounted. There is light rust on the edges, but an edge tune should take care of it. The base is also a little dry - I will travel wax before sending, which should help.
<u>Specs (as printed on topsheet)</u>
Length: 1600 mm
Waist width: 190 mm
Running length: 1370 mm
BOL member Ladia provided a few more measurements (thanks Ladia!): <br>Sidecut radius 10.7m
Tip width 237mm
Tail width 235mm
Would make a great slalom deck for a smaller racer, or maybe a freecarver for crowded weekend days at your local hill. I was tempted to keep it, but this spot in my quiver is already filled.
Questions? Post here or hit me by e-mail.
Thanks!