PDA

View Full Version : Madd 170 with PTC tune


ethanpt
January 26th, 2006, 11:08 AM
Board is in great shape- ridden 15-20 times at the most. Small mark from catek binding in topsheet- cosmetic- covered by binding. $450 plus shipping from Boston.
azrcd5
January 26th, 2006, 02:45 PM
Specs? Most importantly waist width?
RDY_2_Carve
January 26th, 2006, 02:55 PM
I think all Madd's have a 180mm waist width.

Specs are on their website as well. (www.madd1.com)
ethanpt
January 26th, 2006, 03:50 PM
The board is from last year, before they had flex pattern options
RDY_2_Carve
January 26th, 2006, 03:53 PM
what flex is it,

boy finding the madd website was futile untill I followed the link from the prior post

If your having trouble finding board wesbsites be sure to check the gear reviews section here on BOL. A link to each manufacturers websites is provided under each board review. Same goes for boots, bindings, etc.
Derf
January 26th, 2006, 05:05 PM
The Carver's Almanac (http://www.alpinecarving.com/) is also a good place for links.
ethanpt
January 29th, 2006, 06:04 AM
$400 plus shipping
EZE
January 29th, 2006, 06:14 PM
I'm in line for another Madd 170 at the moment However I'm in New Hampshire (Mt Sunapee) and maybe we could work something out.
Eric
willywhit
January 30th, 2006, 11:54 PM
I'll pony up a Burner 197, some Raichle boots, some Ecco shoes and call it even on the Burner 167.
ethanpt
February 2nd, 2006, 09:20 AM
still available
willywhit
February 2nd, 2006, 11:00 AM
ethan , I'm serious. I bet ya can't break the 197. ECES is coming up.
dano
February 2nd, 2006, 11:36 AM
And never settled up? You broke it you BOUGHT it I always say...

VERY CLASSY! What a guy...

Madd buyer Beware.
willywhit
February 2nd, 2006, 12:46 PM
dano, don't be starting trouble.
durace
February 3rd, 2006, 09:40 AM
you have mail. even with the bad press
Erik J
February 16th, 2006, 11:38 AM
Is the board still available?
ethanpt
February 18th, 2006, 12:59 PM
Someone is in line for the board. If this falls through the board will be available- should know in the next few days.
willywhit
February 19th, 2006, 03:12 PM
Ethan, you've got mail.