View Full Version : ISO: bindings to fit burton alp 156
January 14th, 2006, 08:04 PM
I'd like to purchase some used burton binding, but if they fit the specs any brand will do. Peace.
January 14th, 2006, 09:56 PM
I've a pair of Burton race plates in good condition. They come with all mounting hardware, three-hole discs to fit your board, and special aftermarket Burton cant/lift shims which allow you to adjust your alignment in 1 degree increments.
You're welcome to them for $85 plus shipping.
January 16th, 2006, 11:31 PM
Coldrider, If Gonzo is not interested, shoot me an email. Thanks!
January 17th, 2006, 03:08 AM
I have an "almost new" pair of Burton plate bindings, not the race plates but the plates that adjust with a single central screw. Also a 7 and a 3 degree cant. $50 US plus shipping for the works, will not separate. Gonzo, tried to send you an e mail but you've got it turned off, so I've gone public.
January 17th, 2006, 09:31 AM
Chris, I'll take the plates if you don't have a buyer yet. Sent you an email.
January 17th, 2006, 09:43 AM
If those are four hole disks I'm down. Email me at email@example.com for more info and how i can pay you. Peace
January 17th, 2006, 01:13 PM
Chris I'll take 'em if ya still got 'em
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.