Intec heel fit question

[Terry Kirby]

Does anyone know if the intec heel assembly will fit on Raichle sb 123's? ? I think the boots are from 97 , they are blue with red heels. Thanks , Terry

[nekdut]

It depends. If you look at the heel piece from the side, and you can only see about 0.5" of rubber, then intec heels will not fit. But if you can see at good 1-1.5" of rubber (like seen here: http://bomberonline.com/store/images/photos_products/boot_deeluxe_sb413_lg.jpg), then heels will fit. I had to do a fair amount of drilling, both for the Intec cable, and for the 4 bolts, but it wasnt hard work. Oh, don't make the mistake I did. Make SURE you use T-nuts and M5x20 screws to attach the heel to the boot. Otherwise, your heel will stay attached to your bindings, but you wont! :eek:

[Vahur]

My intec binding instruction manual states, that Raichles are compatible from '95 or later. But you can check it out by removing heel piece and if there is cable duct in outer side of heel, then they should be compatible.

[Terry Kirby]

From what you guys are saying I think they will work. Thanks for the help,this site is a great resourse for new riders. Terry Kirby

[Bobby Buggs]

You will most likely have to drill a hole for the cable then rheam it out with a hot all