PDA

View Full Version : WTB - Burton Torque 3 Strap Bindings


west carven
November 27th, 2005, 05:41 PM
WTB - Burton Torque 3 Strap Bindings Size Small any year in working condition.

i think they were made between 93 to 99. the laters years is prefered.
reichouse
November 27th, 2005, 10:08 PM
I used the 3 strap binding years ago, I have another"brand" that performs in the like manner i.e. gives you some added leverage on your turns.
I check back tomorrow, let me know if you are interested
west carven
November 28th, 2005, 12:44 PM
what "brand"?, size and a pic would be nice.
reichouse
November 28th, 2005, 08:48 PM
I have some photos the bindings.
Send me your email address I cannot seem to attach photos to this thread
mlukens
November 29th, 2005, 05:47 AM
I have both 5 hole 3 strp bindings and also 3 strap with a disc for 3 or 4 hole boards they are both burton which ones are you after?
Dan
November 29th, 2005, 06:15 AM
Thoughts on putting these things on a large powder board? I've got a 178 4807 that I'd been planning on riding with plates, but it might be interesting to try some three-strap bindings - I never got to try them back when Burton still made them.
mlukens
November 29th, 2005, 06:48 AM
I learned on plates around 13 years agon and then transitioned to softboots. When I did transition over I put 3 strap bindings on a 185 nitro diablo powder board because I found 2 straps too limiting
west carven
November 29th, 2005, 01:12 PM
hey mlukens - i'm looking for a size small 3strap with 3 hole 5 positions.
west carven
November 30th, 2005, 01:37 PM
heres a pic of my old three strap that needs to be replacedhttp://www.geocities.com/bigmtn2003/torque.jpg

please, anyone? i'll be on the hill in a few weeks.
west carven
December 1st, 2005, 05:56 PM
test attach image
reichouse
December 1st, 2005, 07:44 PM
[COLOR=Black]
These are small size, light, $ 15.00 plus postage from the GreatWhite North[Canada]. It is snowing hard tonight!
west carven
December 3rd, 2005, 03:29 PM
hey reichouse
never heard of "P Brand" bindings, tried to google it, no luck.
could you post a picture of it?
west carven
December 22nd, 2005, 10:50 AM
anybody?
got these.
size small
mnfusion
December 22nd, 2005, 12:09 PM
Yea I just picked up a pair. I might be interested in selling them. Email me back at jboard88@msn.com if interested.
west carven
December 22nd, 2005, 03:25 PM
hey borderboy73

is it the same color as shown on pic. (previous post)

how much?
mnfusion
January 9th, 2006, 12:32 PM
Hope you are still out there. I was looking for an email but didn't see one. i guess I should have looked here first.

Yes they are like the one in the picture above. I just bought them off of ebay and will sell them for what I bought them for...$75.00. Let me know.
west carven
January 10th, 2006, 01:05 PM
boarderboy,

75 smackers seems high.
i was thinking 40 smackers.
whatever, what you thinking?
mnfusion
January 10th, 2006, 03:08 PM
Seriously! Like I said, I just want what I put into them. Bought them off of ebay. Paid $75 with shipping. I'm not going to sell them to you for cheeper and take a loss just so you can get a good deal. I will rarely ride them and just thought I'd pass them along to you since you seem like you want them. You don't need to be a dick about it :mad:
110/220V
January 10th, 2006, 06:53 PM
ha ha
west carven
January 12th, 2006, 03:09 PM
hey boarderboy,
sorry did not mean to be a DH! (dickhead)
i'm just willing to pay that much.
thanks for the offer.
eastcoasticerider
January 12th, 2006, 04:37 PM
I have a set of small-medium Torques.They must be one of the first releases of the Torque bindings.Black on black..and they only come with a three hole disc that is not the universal 3hole used by Burton today....Its an elongated chamfer pattern..I paid $50. on ebAY for them . whats the best offer? It will probably take about $20. to ship.They are in good shape though.I only have the 3hole discs for this binding.
bjvircks
January 16th, 2006, 08:47 AM
ebay auction 7212168520 has a board with these bindings mounted. Maybe seller will sell just bindings??
Rocker_Binding
February 27th, 2011, 05:34 PM
Sorry I'm delete I'm told I should just have a single post. I'll do that and take down the other posts.
tex1230
February 27th, 2011, 07:37 PM
Dude, this is just frickin annoying. have some respect for where you are (the website of a binding maker) and stop with the zombie bump spam.

If Ihad any input, you'd already be banned. You have contributed nothing other than to push your product.
www.oldsnowboards.com
February 28th, 2011, 12:08 AM
Dude, this is just frickin annoying. have some respect for where you are (the website of a binding maker) and stop with the zombie bump spam.

If Ihad any input, you'd already be banned. You have contributed nothing other than to push your product.

I agree. Ease up. How many threads have you started on the same subject?? Those interested in your product got the message. Avoid the redundant posts, it is definitely going to start a negative backlash if you keep it up.