FS: Coiler AM 172

[millstechie]

////SOLD/////

Selling my baby. So beautiful, just couldn't get the hang of carving. It's a <st1><st1></st1><st1>Coiler All</st1><st1> Mountain</st1></st1> 172, ridden only a handful of times and only on good snow. Blue flame finish. Unfortunately, keeping it just because it's pretty isn't practical. Bindings are Catek Olympics with long plates and standard bails. Deck and bindings are in mint condition and have been kept in a sleeve except for when on the slope. Will consider reasonable offers. High resolution pictures are available upon request.


/////SOLD////

[Mike T]

What's the waist width (19, 21.5, 23.5), construction (regular, World Cup, Superboard) and what weight rider was it built for?

[millstechie]

I believe the waist is 21.5 and the board was built to accomodate a 230 pound rider. Regular construction.

[Mike T]

I believe the waist is 21.5 and the board was built to accomodate a 230 pound rider. Regular construction.

Ryan

Most likely too stiff for me given the weight - but perhaps the added info will spark some interest. Best of luck to ya!

[kamran]

I'm interested. I tried to email you but it's not working. Email me what you are asking for it and see if we can close a deal.

[millstechie]

Most likely too stiff for me given the weight - but perhaps the added info will spark some interest. Best of luck to ya!

Thanks!

[millstechie]

I'm interested. I tried to email you but it's not working. Email me what you are asking for it and see if we can close a deal.

Email sent.

[Jim]

A 230# flex is way more than you might want.

Jimfa

[kamran]

Thanks Jim. That was one of the reasons I couldn't afford to make a big offer on this one. By the way, I got my kirkwood seasonpass again for this year. Where is snowwwwwwwww? :angryfire

[Jim]

Keep your pow gear around. Looks to be a 70% chance of a repeat of last season. I'd like to skip the broken clavicle part. :o
Got my Kwood pass too! Now for the Granite Chief half price tuneup deal and I am set.

[JohnO'Brien]

Can you send pictures to my e-mail 4080obrien@rogers.com

[cfj04]

You can email to cfj04@aol.com

Thanks

[millstechie]

Emails sent.

[eastbay]

I am very interested in the coiler.
could you send photo & price$.
thanks Glen

[millstechie]

I am very interested in the coiler.
could you send photo & price$.
thanks Glen
Sure, just need an email addy ;-)
Ryan

[eastbay]

You can send photos & $ to my e-mail thanks
glen_macneil8@hotmail.com

[millstechie]

Email sent.

[Slim]

Could you post a picture here so we all can admire it?

Thanks!

[millstechie]

Good idea! (duh)

[RJ-PS]

Count me in for some photos of that beauty!
rj@exoticboards.com

[Mike Tokar]

I'm not quite 230lbs., (just a few burgers and a pitcher or 2 away) but if you ordered it with a normal flex I could be interested.

Do you recall if Bruce made it stiff or flexy for you? If there's a stiffness number on the sidewall, I could compare it with my friends AM 172 and get an idea of stiffness.

Please post or drop me a line when you can. Do you have a price in mind or are you taking bids?

Thanks, and I'm sorry carving didn't work out for you.

Mike Tokar
mwtokar@earthlink.net

[millstechie]

Sorry for the delay, I was in the field. Emails sent.

[millstechie]

bumpity bump

[Jim Callen]

So what do you mean you "couldn't get the hang of carving?" How long did you give yourself? Did you get instruction? What went wrong?

[jackson]

Can you email me the price?
eugeni@sbcglobal.net

[millstechie]

So what do you mean you "couldn't get the hang of carving?" How long did you give yourself? Did you get instruction? What went wrong?

I don't know, man. I just wasn't enjoying snowboarding at all like I did skiing, not that snowboarding is bad. It's just not for me. I had many futile lessons, read as many articles as possible, and tried for a few years. I even tried different styles and equipment, no dice.

[millstechie]

Can you email me the price?
eugeni@sbcglobal.net

Email sent.

[Jim Callen]

Sorry to hear that man

[korc]

HOw much are you asking for the set-up? What have been some of the offers? Also would you sell just the board?

Simon

[millstechie]

HOw much are you asking for the set-up? What have been some of the offers? Also would you sell just the board?

Simon

Email reply sent.

[110/220V]

Price and terms of bindings, board, and binding/board combo? THX

[millstechie]

Price and terms of bindings, board, and binding/board combo? THX

Reply emailed.

[Thelastdeadmouse]

Interested, send me a quote on the full setup.

[millstechie]

Interested, send me a quote on the full setup.

Email sent.

[freecarver]

Can you send me a quote for the full set up or just for the board?
Thank you
Aris

[millstechie]

Can you send me a quote for the full set up or just for the board?
Thank you
Aris

Email sent.

[Scott]

Interested
Sold?
What's the cost?

[heatzig]

Sorry for being OT, but wanted to know if you can tell me anything about BigSky - I am planning a trip there this Christmas....
Thanks, Eric

[millstechie]

Interested
Sold?
What's the cost?

Not sold yet. Sent email reply.

[millstechie]

Sorry for being OT, but wanted to know if you can tell me anything about BigSky - I am planning a trip there this Christmas....
Thanks, Eric

No problem, man. I actually haven't had a chance to hit BigSky yet, but I've only heard good things about it. I don't know though if it's suited very well for carving. MT has more of a tendency to fulfill the "North Western US snow" expectations, that is, really good snow if you're not focused completely on groomers.

[eos4life]

Hi!

Can you send me the details for the Coiler (price, shipping cost to Montreal (H3E 1A2)?

Thx, Francois.

[millstechie]

//////SOLD/////