PDA

View Full Version : burton speed 185 with catek WC long plates and bunch of other stuff



bobdea
July 26th, 2005, 05:59 PM
the board has seen about 30 days on snow it is the year that had the topsheet that looks like mother of pearl I think it was 03
it was a replacement for a board that I broke
this board was from one of the years that burton used a final finish that had tendency to chip and crack, burton claims that it is purely cosmetic and does not effect the ride.
this board is 19.5 at the waist and has 14.5 SCR

the cateks have new heel bails, the reason I am letting these go is that I ride intec
I will post pics when I can dig it out of the barn
$300 USD shipped

old burton rippey 56 from 98 or so its been beat and needs a grind but should hold together for pow session with a light rider or for some jib action
make a offer

Generics 159 SL 9.9 SCR and 19.7 waist, been ridden allot the topsheet has plenty of scratches but the base looks good
make a offer

Prior WCR 185, stiff race rocket, its a weapon on soft corduroy the specs are very similar to the above burton speed(I suspect because Mark Fawcett was riding both companies boards for awhile) but it is a totally different type of ride
$250 plus shipping

rossignol cut 160s with demo bindings(fits almost all adult size din boots)
learning to ski? try these out!
these skis have been used a good bit.
make a offer

more skis, Ogasaka TCS 188s been mounted once from around 1995 great bump ski if you like the long stuff in the bumps
$50+shipping

bobdea
July 26th, 2005, 10:32 PM
so whatever you might have is worth asking if I will take

wvrocks
July 28th, 2005, 07:06 AM
Do you have any pictures of the Speed 185?
________
Paradise Park condo Jomtien (http://pattayaluxurycondos.com)

bobdea
July 28th, 2005, 06:45 PM
Do you have any pictures of the Speed 185?

that will happen next week sometime

garyj
August 11th, 2005, 08:32 PM
Hmm, the WCR sounds interesting, tell me about the board. General condition, specs, and anything else you might add. Would like to see pics if you have. Thanks, GC.

transam617
August 31st, 2005, 06:08 PM
Still have the catek plate bindings?
If so -- pics and how much.