View Full Version : utah expression session
oldvolvosrule
November 7th, 2003, 02:14 PM
I know that is has been talked about on the old message board but I need to know if the dates had ever been finalized for the UES. I will be coming up from Southern Cal and staying with my bro in Riverton. I just need to know the dates so I can book my flight. Also, did you ever finalize decisions on where we will be riding? I know that lots of resorts were suggested.
Skully
November 7th, 2003, 04:10 PM
Yep, we have talked a lot about it, but not solidified any dates.
So, anyone interested, SPEAK UP! Late January, or early February, in between ECES and SES, that's my vote. As for places to ride? The Canyons, Park City are my votes. Others have suggested Snow Basin and Solitude as well.
If we don't have an "Official" expression session, I'm sure you could hook up with a few of us when you get here anyway...
mellowjonny
November 7th, 2003, 04:58 PM
Please one of you utes pick a date for this thing:rolleyes:
eddie
November 7th, 2003, 07:10 PM
I would like to come but I am going to be snowmobiling in Yellowstone around the last week of January. I don't want to miss all the fun so lets go in Feburary.
Eddie:p
tilledog
November 7th, 2003, 10:00 PM
Yep,
Some time in late feb early march. Carvy carvy in March!!
Will post a date within next week!! :D
Bordy
November 8th, 2003, 04:41 PM
Lets think after SES maybe around WeeK of March 1st We can try to put a few mtn in a few days PC, Canyons, Snowbasin, and maybe the Bird! :rolleyes:
tilledog
November 8th, 2003, 07:34 PM
I'll look at the calender for around the 1rst of March and post accordingly. We'll get it together...:))
oldvolvosrule
November 12th, 2003, 11:48 PM
back to the top
mellowjonny
November 13th, 2003, 05:04 AM
March 4th-PC 5th-Canyons 6th-Snowbasin 7th- the bird
It's a start--change as you like.:cool:
tilledog
November 13th, 2003, 05:08 AM
Sounds goot. Thanks for getting around to it. I have a startup hardboot retail company here in Salt Lake. I am starting to make some good contacts with gear. I should be able to get some hardware for the event.
I have a thought for a name too!
mellowjonny
November 13th, 2003, 05:19 AM
What name did you come up with?
tilledog
November 13th, 2003, 05:50 AM
It's kinda gay..... Hardbooter's Ball?:confused:
utahcarver
November 13th, 2003, 11:31 AM
Do we have any sponsors yet? I realize that this event is in the planning stages still and may end up being impromptu. But, if we could get some local Salt Lake sponsorship, that could be very helpful in the future. REI, Garts, Salty, who else? What about group discounts for PC, Canyons, or Basin? I'm happy to help. Has someone already started looking into some local or distant help?
tilledog
November 13th, 2003, 11:49 AM
I'll sponsor it as much as I can. I will speak to the resorts, some manufacturers and such in the near future. We're working on getting our website up right now. Within a couple of weeks we should be rollin.
Davo
tilledog
November 13th, 2003, 11:52 AM
We'll dedicate a page on our site to the event also. For now it'll be the "hardbooter's ball" I'm open for name suggestions though. I would love if it was unique though ie not UES.
This'll be fun to put together.
Dave
Bordy
November 13th, 2003, 01:42 PM
:D
Skully
November 13th, 2003, 02:59 PM
Sign me up for the team!!!
Skully
November 13th, 2003, 03:09 PM
Just wanted to put my vote in for the dates, they sound good to me.
I also have a limited ammount of discount tickets to The Canyons, but I don't know how many I will have left by March, but, for those interested, first come, first serve, they are yours.
oldvolvosrule
November 13th, 2003, 04:38 PM
I just spoke to my bro in Rivertin and he is pumped about carving with other guys in the area. He says he doesn't like carving cuz he is usually the only one at the resort that he goes to.
I might need a ride one day as I don't thik my brother can get all those days off, Is that possible form one of you Utah locals?
eddie
November 13th, 2003, 05:31 PM
Where does your brother ride at? He can ride with any of us and thus would have no excuse to not carve.
Where are you carving at Bear, Summit, Mt. (gettin') High, or dare I say Baldy? I used to ride at all of them but I got tired of the crowds.
Eddie
oldvolvosrule
November 13th, 2003, 05:37 PM
I ride Summit quite a bit, Bear has turned into a jibber's smorgasboard. Summit bought Bear last season and they decided to put all the jibbers there by building them a huge terrain park, pipes, rails, boxes,sacks,suitcases, whatever you want to call them. Summit now becomes more family oriented and more carver friendly too!
I also head up to Mammoth whenever I get the chance to do so.
eddie
November 13th, 2003, 05:39 PM
Let us know when your hardboot retail is set up so we support fellow utah hardbooters. You know, we could by things or if you have a store we could hang out all the time wishing we had the money.:p
Eddie
eddie
November 13th, 2003, 05:45 PM
I heard the story from my little bro that Summit purchased Bear. He is a crazy jibber but got tired of the crowds; I convinced him to move up here to the holy land and now I try to convert him from his sins. Repentence through hardboots.;)
Eddie
mellowjonny
November 13th, 2003, 05:46 PM
I dont know about the name--I think it needs to be a bit tougher. I'll think about it
eddie
November 13th, 2003, 05:50 PM
I talked to my wife about the SES and to my suprise, she sounded like she supports it (kinda). But brother, it will come down to this: SES or UES and I am leaning toward the Utah brotherhood.
I have too much to dream about.
Eddie
tilledog
November 13th, 2003, 08:06 PM
We've been working hard on the site for awhile now. I will keep all updated on the rollout. We're berry berry excited to get it going. We're just working out the graphics now. The backend of it is complete...
Utah is long overdue to be on the Hardbooter map.
Bordy
November 13th, 2003, 08:37 PM
:cool:
tilledog
November 13th, 2003, 08:56 PM
Of course she can. Only if she rides a 190+ like er little boy, though. And only if her little boy scores me a sub $400 PC pass.
No really.
mellowjonny
November 14th, 2003, 05:42 AM
How about the --Wasatch Trenchin Convenchin--
Rusty
November 14th, 2003, 06:05 AM
I've seen Billy's mom drag her sholder riding a 197 and pop three feet of air through her transitions....it's true...
Rusty
tilledog
November 14th, 2003, 06:24 AM
Cool Name!! Got my vote.
Bordy
November 14th, 2003, 06:37 AM
You carve , you carve, you carve , you carve, you carve, no slide even if its icee!
Wait it does not get Icee here, never mind!
Eddie SES, WTC, ECES who cares lets make turns!
Dave- alright so my mom is on the team, come on Rustys got her Back.
P.S. PC opens to the public today see you there!
Also I will be pimping product an MAXS(all season long) at the PC base come see any time If its slow I can make turns. If its fast I may be scared! :eek:
I can't belive we let some out of stater name our session. It's a shame the snows so good we can't even think anymore!
tilledog
November 14th, 2003, 07:05 AM
I've been brain dead fo years now!
tilledog
November 14th, 2003, 07:37 AM
See new thread for the Wasatch Trenchin' Convention
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.