garyj
February 27th, 2005, 07:35 PM
-Three and four hole disks with additional three hole aluminum disks for stiffer ride if you choose
-Optional physics toe pieces (your choice to be used in place of toe bails---boots must be physics compatible)
-Hard (grey) bumpers and Soft (blue bumpers)
-Original Burton stomp pad (never used) could also be used as boot cleaner at front door.
The bindings have seen several seasons of riding and are in good condition. I have included all screws necessary to bolt up and go.
The heels should work with any Intec compatible boot, however; you may have to use longer screws (not included) if you are not ridding Deluxe or Riechle boots.
I don’t recommend using the physics toe pieces, because the toe hook, which bolts to boot, has failed me several times. For this reason I went to using toe bails instead. Nevertheless, the choice is yours, however; if you decide to go the physics route you will need to get a second toe hook from Burton.
$80.00 gets the bindings shipped within the lower 48. Post or email me with your questions.
-Optional physics toe pieces (your choice to be used in place of toe bails---boots must be physics compatible)
-Hard (grey) bumpers and Soft (blue bumpers)
-Original Burton stomp pad (never used) could also be used as boot cleaner at front door.
The bindings have seen several seasons of riding and are in good condition. I have included all screws necessary to bolt up and go.
The heels should work with any Intec compatible boot, however; you may have to use longer screws (not included) if you are not ridding Deluxe or Riechle boots.
I don’t recommend using the physics toe pieces, because the toe hook, which bolts to boot, has failed me several times. For this reason I went to using toe bails instead. Nevertheless, the choice is yours, however; if you decide to go the physics route you will need to get a second toe hook from Burton.
$80.00 gets the bindings shipped within the lower 48. Post or email me with your questions.