PDA

View Full Version : Molding


ktm162
March 30th, 2011, 06:55 PM
OK just got my first pair of hard boots track 325 mondo 30.5, yes from this web page. What is molding all about and how do I do this?
Bora20
March 30th, 2011, 07:23 PM
http://www.yyzcanuck.com/E_tech_cooking.htm

I assume you mean for the liners.
ktm162
March 30th, 2011, 07:42 PM
Thanks this will take some work.
Bora20
March 30th, 2011, 07:46 PM
Go to a boot fitter and have them do it for you.
omskates
March 31st, 2011, 12:48 AM
Go to a boot fitter and have them do it for you.

Yes, please do if you are a racer or can spare the cash. Otherwise a regular recreational boarder can get good results with the excellent instructions provided by the previously posted link. I did and I'm happy with them:)

Good Luck

--Chandler
Bora20
March 31st, 2011, 07:33 AM
Yes, please do if you are a racer or can spare the cash. Otherwise a regular recreational boarder can get good results with the excellent instructions provided by the previously posted link. I did and I'm happy with them:)

Good Luck

--Chandler

It cost me $20 at my boot fitters to have my shells and liners heated, foam stuck all over problem areas, and everything put together and cooled down.

:biggthump
omskates
March 31st, 2011, 10:30 PM
It cost me $20 at my boot fitters to have my shells and liners heated, foam stuck all over problem areas, and everything put together and cooled down.

:biggthump

That's not too bad. Thought it was more for some reason. If I ever get 'spankin new boots I'll do that.:biggthump