PDA

View Full Version : Sidewinder Bindings



Enzo
March 13th, 2011, 01:28 PM
I purchased the Sidewinders in January 2010. They were used about 15 days last season and have been in storage all of this season. The bindings come with yellow E-rings, a 3deg cant, and a 6deg cant. They also have new yellow E-pads, lightly used purple E-pads, and all mounting hardware. The standard bails show some light wear from rubbing against my boot buckles. One of the set screws is missing and will need to be replaced. It is just a $2.00 part from Bomber: http://www.bomberonline.com/store/bindings/parts_set_screw.cfm


$350 Shipping/Paypal Fees included to lower 48.
**SOLD**

en93nsx
March 13th, 2011, 02:12 PM
Enzo,

I will take the Sidewinders. Email Sent

Enzo
March 13th, 2011, 02:30 PM
Wow that was fast! :biggthump

Just got your email...it took 20+min. The BOL server must be slooooow today.

michael.a
March 13th, 2011, 03:54 PM
Sorry I want to hijack this thread cause Im really fascinated, can you tell me what kind of bias you run

Enzo
March 13th, 2011, 05:09 PM
Never measured it, but it's probably around 15mm. I just set up the toe/heel blocks so that my toes on my rear boot were on the toe side edge and the heel of my front boot was over my heelside edge. My boots are mp25 so I have some leeway on wide boards and don't boot out.