UPZ shell size

[ZetaTre]

I got a pair of UPZ RSV and I'm trying to figure out what size range covers the shell. How do the numbers printed on the shell relate to MP size?

These one I have are:
Tongue: 7 - 9.5
Cuff: 8.5 - 12.5
Sole: 8.5 - 9.5
Liner: 9 (or at least that's the only number I could find...)

Anyone can help me relate these number to MP? Thanks!

[KingCrimson]

Give me the number printed above the heel..Hopefully we can check it against the 2 UPZ sizes we've recorded so far. You're probably in luck because it's most likely a mondo 27 shell.

[mike g.]

hey mine are a mondo 25. the side of the boot says. 287mm, or 5.5/6/6.5.
just in case they are smaller then a 27.
________
EPIC (http://www.dodge-wiki.com/wiki/Dodge_EPIC)

[skandinavec]

UPZ Liner size 9 is 28 mondo. Is the sole size writen above the heel on the inside of the boot?? If the lenght is 312mm then the shell can be used from 27.5-28.5 mondo.

[ZetaTre]

Thanks you guys.

The sole length is 312mm which based on the "Sole Lenght Database" thread (http://www.bomberonline.com/vbulletin/showthread.php?t=30607&highlight=upz+size) they are a size MP 28, as confirmed by skandinavec.

The stock liner is too big for me and I'm planing on using the Deeluxe/Intuition moldable liner I had in the Raichle which is a size MP 27. I tried them once with this setup and they appear to be working fine...

I was actually more so having an ADD/OCD moment and trying to figure out how the number on the shell relate to MP size, if they do in any way...

[bobdea]

Thanks you guys.

The sole length is 312mm which based on the "Sole Lenght Database" thread (http://www.bomberonline.com/vbulletin/showthread.php?t=30607&highlight=upz+size) they are a size MP 28, as confirmed by skandinavec.

The stock liner is too big for me and I'm planing on using the Deeluxe/Intuition moldable liner I had in the Raichle which is a size MP 27. I tried them once with this setup and they appear to be working fine...

I was actually more so having an ADD/OCD moment and trying to figure out how the number on the shell relate to MP size, if they do in any way...

which style liner? might want them!~

[ZetaTre]

which style liner? might want them!~

You mean the original UPZ liners? Here' they are:

http://i259.photobucket.com/albums/hh284/lpcapital/Stuff%20for%20sale/DSCN2049.jpg http://i259.photobucket.com/albums/hh284/lpcapital/Stuff%20for%20sale/DSCN2051.jpg http://i259.photobucket.com/albums/hh284/lpcapital/Stuff%20for%20sale/DSCN2050.jpg http://i259.photobucket.com/albums/hh284/lpcapital/Stuff%20for%20sale/DSCN2052.jpg

[bjvircks]

Hey ZetaTre... can I get in line after bobdea for those liners? (actually, I'd like to get in line BEFORE bobdea... :eek: but anyway...)

I've got a couple pair of UPZ RSV 'superlight', one pair I use and the other smaller pair was DOA (cracked heel, bought for parts). I'll find the size and sole length #s and post.

About the liners... I wanted to try a different liner last season and bought a set of UPZ 'FLOW' liners from a BOL member. The Flows had too much volume in the cuff and the tongue was just not working out for me. The foot portion seemed fine. I went back to the original thin liners like the ones you show. I'd like to buy another set (cheaply) since I'm not going to be able to afford high quality fully moldable liners next season unless some rich relative dies.