Raichle SB 123 W/ Intec & TD2's

[Chubz]

I'm new to alpine, can anyone tell me if the above mentioned boots can accept the Intec system and TD2's? ANy input would be greatly appreciated.

Thanks

[Carp]

Yes they can, but they may need a little drilling. It's almost as if there's a plug where the cable is supposed to go. Just drill a hold that's large enough for the cable. When you take out the liner you'll see the plug I'm referring to. Make sure you drill straight to the angle of the heel.

[trikerdad]

I have an old pair of 124's that are not intec compatible. They have a different shape heel. I have an old pair of 125's that I had to drill and t-nut with no problems. I wouldn't say, categoriclly, that a pair of 123's are intec compatible.

[kamran]

with self-tapping screws and MUST NOT be used to hold the new INTEC heels on

I used the Burton physics "intec like" heels on my Raichle 423 with the self tapping screws , I tried them for 3 days last year and although I was very much afraid they'd lossen and come off, they didn't ! I hope they stay on. I'll keep checking them on a daily basis.