rjnakata
March 9th, 2010, 04:43 PM
SOLD SOLD TD2 Step-ins with extras
The cant discs are 0 degree and 3 degree, with YELLOW (soft) elastomers. 4x4 and 3D pattern mounting discs included. Also (2) extra lightly used Step-in Receivers included. Elastomers are second generation composition (softer than 1st generation clear yellow).
The original INTEC heel receivers have relatively little of the customary scratches from use and are certainly NOT gouged. Toe bail springs are fine. This set hasn’t been used much, and there are only a few light scratches here and there. The screw holes and Allen bolt heads are not stripped. No "buggered" screw heads. Completely stock, no modifications. Comes with all necessary hardware.
These bindings require INTEC heels for your boots.
<O:p$180 + shipping. Paypal, check or M/O.
Email me at RJNakata (at) aol com<O:p</O:p
The cant discs are 0 degree and 3 degree, with YELLOW (soft) elastomers. 4x4 and 3D pattern mounting discs included. Also (2) extra lightly used Step-in Receivers included. Elastomers are second generation composition (softer than 1st generation clear yellow).
The original INTEC heel receivers have relatively little of the customary scratches from use and are certainly NOT gouged. Toe bail springs are fine. This set hasn’t been used much, and there are only a few light scratches here and there. The screw holes and Allen bolt heads are not stripped. No "buggered" screw heads. Completely stock, no modifications. Comes with all necessary hardware.
These bindings require INTEC heels for your boots.
<O:p$180 + shipping. Paypal, check or M/O.
Email me at RJNakata (at) aol com<O:p</O:p