PDA

View Full Version : 03 F2 Speedster RS 177 + Titanium Intec bindings.



djlepper
February 6th, 2010, 12:14 AM
F2 Titanium Intec bindings. - SOLD

Great condition, bunch of wedges, one lift block under heel, 4x4 plates + screws.

I'm not sure if F2 bindings come in different sizes, but if they do these are large (I wear 31mondo boots and they were fine)

$100 + shipping


2003 F2 Speedster RS 177. 15m SCR, 192mm waist (I think). - SOLD

Good condition, topsheet in great condition except it started delaming at the tail so I cut the piece of topsheet out and sealed it with epoxy.

Base in good condition with some scratches that a regular grind will take care off, except one deeper scratch that was filled.

Board has lots of life left, camber is still good.

Will post pictures tomorrow.

$100 + shipping


If you take both I will sell it for $200 shipped.

djlepper
February 6th, 2010, 03:05 PM
Here are some pictures of the board.

I picked up the board from storage and forgot that I've put a coat of storage wax at the end of last season. I've scraped some where the filled bigger scratch was but it's very hard to see... especially on the pictures.

The delam at the tail is smaller than I remembered. It has been sealed and doesn't affect the ride:)

Generally board is in great condition.

If you want to see more or larger pictures just send me pm.

Wolf
February 6th, 2010, 04:00 PM
Will email you

djlepper
February 6th, 2010, 07:35 PM
Both bindings and board has been SOLD. Thanks Wolf!:)