185 Kessler and Sigi boards for sale

[josh_wylie]

I have two 2010 185cm Kessler GS boards with waste width 202mm for sale as well as a brand new 2010 Sigi 185cm GS board with waste width 202mm for sale.

The Sigi has never been ridden and still has the manufactures stickers on the base. It has four hole inserts and two middle inserts for the Vist plate.
$1000

Both Kesslers come with a modified Hangle plate. The plates have been shortened and adjusted to allow a Carbon/wood bridge between the front and back foot. The Carbon/Wood plate was built by Mike Tinkler. This new plate design gives you great stability and tons of power. Chris Klug just qualified using this plate design.


Race board, Kessler 185cm has only four race days on it. This board has a great grind and has been thoroughly saturated with wax. Comes only with Hangle inserts and modified plate.
$1400

Trainer board, Kessler 185cm has about 20 days of training on it. It has a small nick in the nose of the board from hitting a stubby. It has been filled with epoxy and does not effect any performance. Comes only with Hangle inserts and modified plate.
$1200

contact me,
josh dot wylie at gmail dot com
802 233 2802

[CarvingScooby]

What's the stance on the Carb Plate?

Email me: carvingchanel at yahoo dot ca

Let me know, thx.
Roy

[~tb]

Josh,

(We have met before through Mac and Marley)

If these don't sell by the first week in march. . . bring them by the ECES at stratton and I bet you can sell them on the spot.

Hope all is going well your way.

Todd Brown

[beetle3]

whats the best you can do on the trainer kessler

[beetle3]

will you take 800.00 plus shipping for the trainer

[tex1230]

are the modified plates stance specific (regular or goofy), or can they be flipped?

[josh_wylie]

Sorry guys should have given you some more info. The Tinkler plates are built for regular riders only and the stance width is 51.5 cm. I hope this helps. Let me know if you have any more questions.

[ShortcutToMoncton]

Sent you an email but not sure if you received it: are these boards "stock" or are they built for a particular weight range in mind?

I'm thinking primarily about the SG – I've found a 20"+ stance to be slightly uncomfortable for my 5'10 height, although perhaps I need to play around with it a little more.... :)

greg

[www.oldsnowboards.com]

Sweet deal. Half price for the hottest set ups on the planet. Ready to ROCK!!! Nice!!

(not my gear)

[Sierrasnowbrdr01]

I'll purchase the 185 Race board. Can have the money to you as soon as you contact me.

[beetle3]

i was wondering if I can make it capable for goofy footing by takin it apart.
thank you

[www.oldsnowboards.com]

You can certainly take it apart, that will not change the fact that the plate is regular? Technically you could ride it goofy as is. It would be far from ideal nor would it be what it was designed to do. The plate has inserts in it. If you flip it over they could be pointing down. The plate is similar to a snowboard, with camber (not all but most), so turning it over would be truely "Reverse Camber". In a bad way :freak3: Does that help?



i was wondering if I can make it capable for goofy footing by takin it apart.
thank you


Sorry guys should have given you some more info. The Tinkler plates are built for regular riders only and the stance width is 51.5 cm. I hope this helps. Let me know if you have any more questions

[josh_wylie]

Sale pending, thanks for your interest. Ill let you all know if they become available.

[Eric]

Sale pending

Jim??

[ShortcutToMoncton]

All of them gone?

[josh_wylie]

Hey Guys, sorry for not getting back to any of you lately. I thought I had sold all of my boards. A local friend was going to take the SG but he hasnt come up with the money so I putting it back up for sale. Im off the next few days and will be checking my email regularly.

josh dot wylie at gmail dot com

[www.oldsnowboards.com]

Anything left Josh?

[A.Leal]

is the sg still left ?