FS: TD2 Standard, Step-in & Suzukas for parts

[Mellow Yellow]

For Sale
TD2 standard, step-in binding with TD3 intec receivers and Deeluxe Suzuka shells for parts

I accept Paypal, Money Orders or personal checks. Gear ships on delivery of MO or clearing of personal check. Feel free to ask around here, I'm sure someone will tell you what an upstanding fella I am :D

TD2 Standard
Overall Condition: good, normal boot scuffs and screw marks
Included: 3 and 6 degree cant plates, 1 yellow e-ring and hardware (you'll need another e-ring)
UPDATE - Mod: 6 degree cant plate has two hole drilled into the rear (see pic) the messy hole was not a product of my most shining moment, the clean hole was my second attempt. The purpose of the hole was so I could run a cable lock through the cant plate of the board when I took two boards to the hill and one just had the cant plates mounted. Long story short, I have been riding with the holes in the plates for 2-3 seasons, no issues.
Price - $190 shipped to lower 48

TD2 Step-in with TD3 receivers - SOLD to Teach
Overall Condition: good, normal boot scuffs and screw marks
Included: 3 and 6 degree cant plates, yellow e-rings and hardware
UPDATE - Mod: 6 degree cant plate has one clean hole drilled into the rear (see pic of above cant plate - this cant plate only has the clean middle hole). The purpose of the hole was so I could run a cable lock through the cant plate of the board when I took two boards the hill and one just had the cant plates mounted. Long story short I have been riding with the holes in the plates for 2-3 seasons, no issues.
Price - $220 shipped to lower 48

Deeluxe Suzuka mondo 26 shells - for parts
Overall Condition: bad (right shell) to fair (left shell)
Included: new forward lean mechs off of a pair of 700Ts, spoilers (not in picture)
Missing: one heel pad, one cant cuff assembly, pins, no liners
Issues: Left toe strap buckle only tightens to the first or second tooth. Right shell cannot be used with standard bindings. I crash and burned into a cement wall at the ECES a few years back and the heel lip was rubbed off from the impact :freak3:... shell has been used for 2 or so seasons since but using intec on the right boot.
Price - $35 plus shipping to lower 48

http://i32.photobucket.com/albums/d1/jvioral/IMG_3506.jpg

http://i32.photobucket.com/albums/d1/jvioral/IMG_3507.jpg

http://i32.photobucket.com/albums/d1/jvioral/IMG_3510.jpg

http://i32.photobucket.com/albums/d1/jvioral/IMG_3500.jpg

http://i32.photobucket.com/albums/d1/jvioral/IMG_3503.jpg

[WASMAN]

I will take a pair of the TD2's if you will split them up. (I ride STD on the front and SI on the rear).

[Mellow Yellow]

that is how I rode them too.... but, it'll be an easier sell paired SI/SI-Std/Std. If I don't have any luck, I'll let you know.

Thanks

[Wolf]

Definitely interested in the boots for a buckle I need. Email sent.

[WASMAN]

Email sent

[Mellow Yellow]

emails sent to all that responded - thanks

[GtheGardner]

perfect! split them i'll take the other pair of td2's front reg back stepin. i ridew that way too and have been looking for a second pair

[Mellow Yellow]

GtheGardner - Wasman mentioned that he and a friend were interested in the set, I'll let you know if they are available. You are next in line.

Thanks

[Mellow Yellow]

wasman and gardner - see my update regarding the 6 degree cant discs

[GtheGardner]

doesn't bother me. i use three deg, should i send $ ?

[WASMAN]

sorry Mellow Yellow, I am out.....

[cavejust]

Email Sent.....

[Keyser Soze]

If I pulled a heel pad off a pair of older Raichles, would they fit the Suzuka to be ridden with a STD binder?

[Mellow Yellow]

Wolf - busy week at work, have not gotten to the PO, thanks for your patience

cave - no email received

Keyser - you could put a standard heel on the boot, But I would not recommend riding standard binders as a good portion of the lip is worn off (see picture)

[alpinenick]

are the td 3 with step ins still available thanks

[Mellow Yellow]

gthegarden - let me give it a few more days, unless there is another person out there reading this that wants a standard/intec setup? Or we can deal now if you just want to go with the all intec setup.

alpinenick - bindings are still available though gthegarden is next in line, the bindings are not TD3s. Both pairs are TD2's. The step-in pair has TD3 intec heel reciever (steel as opposed to alum) Would you be interested in a standard/intec setup? (front foot standard/rear step-in?) That is the setup gthegarden is interested in....

Thanks
Jasen

[Wolf]

Mellow Yellow - per my email, I'm going to pass on the boots and just buy a single new buckle instead. Makes more sense since I'm going to resell the AF600's once I replace the missing buckle.

....Wolf

[GtheGardner]

i'll wait, no hurry

[b0ardski]

email sent for shells

[GtheGardner]

any change in status? just checking.

[Mellow Yellow]

G - email sent

[b0ardski]

I'll take the shells, send me your paypal addy:biggthump

[teach]

Are the TD2 step-ins still available?

[Mellow Yellow]

Teach - One guy ahead of you on the step-ins. I'll let you know.

Ggardener - no response, so you've moved to the end of the list, sorry.

Boardski - send me your address - I can get them to the post office tomorrow

[WASMAN]

where am I in line for the TD2's? I may take both pairs if still available. will have to confirm tomorrow....
let me know.

[Mellow Yellow]

WOW... these have been a hard sell... everything is still available, nobody is responding to emails so Teach, you are up to bat, followed by WASMAN

Also - I am planning on being at the ECES, so if you are too... save on shipping....

[teach]

You can reach me via email through this forum, and if I don't get anything I'll post here. Send me your Paypal address or mailing address if you prefer a check (OK with me, not in a hurry). I'd like to get to ECES but doubt I will.

[Mellow Yellow]

teach - you have mail - thanks

[Mellow Yellow]

TD2 step ins sold - thanks teach!

Edit - just shipped