Head liner thermo molding ?

[Surf Quebec]

Hi,

I'm a new owner of Head Stratos Pro boots

On the head stratos pro liner it is mentioned: 10 min 90-100 C Tube heat machine

Does that mean we can only do it in ski shop ?

Or can we mold the head liner like the raichlee ones in the oven or use a heat gun ?
Thanks

[queequeg]

Hi,

I'm a new owner of Head Stratos Pro boots

On the head stratos pro liner it is mentioned: 10 min 90-100 C Tube heat machine

Does that mean we can only do it in ski shop ?

Or can we mold the head liner like the raichlee ones in the oven or use a heat gun ?
Thanks

The stock liner is only heat moldable in the heel area. I don't think you want to stick them in your oven ... not sure about the heat gun thing.

[BlueB]

I molded my Dalbello liners (same as head - that's where Heads come from) with a hair dryer! Toe area is also moldable.
When blowing heat into the liner, be carrefull not to burn the inner lining material.

[Sinecure]

Only the lower part is heat moldable so putting them in the oven would probably be a bad idea. Mine were done at a shop using one of their heat tubes. I suspect you could accomplish the same thing with a hair dryer, but not positive.