Spring cleaning

[carvedog]

I will post pics tonight if possible.

Burton Race plates two pair. One pair still available.

Pro Flex plate bindings. These are great for light rider. $40 Sold

Sims plate bindings. For the old style inserts. Good for a retro ride if you are putting one together. Sold

K2 clicker boots ( stiff ones ) and clicker binders to go with. size 28. $100 or offer.

Asym Goofy M5 Burton. SOLD

Ultraprime beater board cheap. 167 or 171. SOLD

Rossignal Throttle 167 $100 or make offer

Hooger 163 with Wombat binders. Sold

Morrow soft boot binders. $25

Amp 163 with old style Burton plates, cant on rear $100 or offer.

Burton Performance step in $30.

[Wolf]

Emailed about the race plates.......

[big canuck]

interested in the 29 boots and binders.... Condition out of 10? Thx.

K

[carvedog]

interested in the 29 boots and binders.... Condition out of 10? Thx.

K

They haven't been used much at all. Look to have about 30-40 days on. I will dbl chk size and any wear and try to post pics tonight. 8 or 8.5 out of 10 on the boots. Clicker binders are close to that in condition. I got these with the board I am riding on right now to teach. Seems like I tried them all on but went with my Burton SI since I already had footbeds in.

Thx

[*Ace*]

Asym burton....
Email me photos.
acepha@gmail.com

[redriver]

can you tell me more about the proflex bindings- model, condition, price...

[big canuck]

or send me some pics of the boots and Clicker bindings, I'd like to check em out. Thx,

[justsliding]

any details/pics on the Rossignal Throttle 167

thanks

[Kaoru]

Hi. Want Photos, Year and Specs of UP171. Email sent.

[carvedog]

K2 Clicker boots. These say size 28. They were out of a rental fleet at one point and say 11 on the back. I ride the Burton Fire 28.5 and they fit me like a glove. Sorry about the size mixup Kurt, they were up on the shelf aways and I thought they were 29.

Their condition is better than I thought. I dont think they have 20 or 30 days on. Some anodizing scraped off on the binders but no measurable wear on the hooks or the binders but cosmetic.

[carvedog]

These are the clickers and the Sims old school insert pattern. Very little wear on either of these.

[carvedog]

These are the Proflex binders. They are in new condition. Not sure they were ever even mounted up. Super beefy bails, built in cants see the photo from the back, all plastic base, metal discs to mount to board. I don't have the screws to mount to board. Sold

Cants are cants. I don't use them make an offer. Cants are soldSOLD

[carvedog]

These are in great shape. I can't find the little plastic bushing that goes with the new bail. These are new Burton toe bails I am including. They don't have the rubber piece that goes against the board either. I will keep looking for all the little parts. Heel bails seem to be good. I have all the screws for these and they include the discs 3d or 4hole.


Gray 4x4 discs are sold

[carvedog]

I can't find the plastic that goes under the toe bail for this pair either. I do have the other red bail on another board and will include that. Includes the discs 3d or 4 hole.

Gray race plates are SOLD

[carvedog]

163 Comp with wombat bindings.

This board has a ton of camber, lots of edge, some superficial rust on edges and should be super fun.

This is a little weirdness on the tail on the top sheet. Nothing on the bottom. It needs a grind and some ptex, but the base is in good shape.

SOLD

[carvedog]

Not as much camber as the Hooger, but lots edge left on this board.
No core shots or major ptex work needed. Does need a tune.
This has one of those two piece adjustable looking cants.
it has teeth that engage top and bottom and rotate if I remember right. I didn't take them apart but working from memory here a bit.

[carvedog]

The top looks good. See next post for base photos.

ALP is SOLD

[carvedog]

SOLD as mentioned this is a beater board. Minor delams along one edge. One or two almost through the ptex shots not on edge. and more delam on tail.

I think it would be ok in powder. good in bumps if you like that kind of thing. Make an offer.

[carvedog]

Hardly worn. Maybe not. I think I got these boots new, had them fitted with foam liners so I know I never wore them.

[Wolf]

You snuck that 1996 Alp 163 in there too. I've always wanted one of those to go with my old 156. (I know, a modern board will run rings around it, but I like the pretty pinstripe deck). I'll email about the board.

Also, I think the 171 is an Alp also, not a UP. But I don't claim to be an expert. Not interested in that one though. No pretty pinstripes.

....Wolf

[carvedog]

I bet you're right. I will go look again. Took me a while to get all this done and then I am dyslexic too, so I reverse all kinds of things in my head sometimes.

Thanks.

[CarvingScooby]

Email me carvingchanel @ yahoo dot ca

[carvedog]

any details/pics on the Rossignal Throttle 167

thanks

I will try to get those up tonight - I ran out of time this morning.

THX

[carvedog]

Here you go with some pics. I have ground it lightly twice. Lots of camber, lots of edge left. This was my slalom board for a couple of seasons and has only 30 to 40 days at most on it. I bought it new. The base is near perfect and doesn't need any ptex that I could see. Still has wax ( at least some ) in the base and edges are sharp.

[carvedog]

Make an offer. Includes the 4x4 discs but no screws.

[bobdea]

that green 171 is a alp for sure, it replaced the alp 169 from the previous season when they tweaked the shape and construction a bit.

[carvedog]

that green 171 is a alp for sure, it replaced the alp 169 from the previous season when they tweaked the shape and construction a bit.

I figured that out. For some reason I thought it was the Ultraprime. I have one of those kicking around too, but I think my thieving nephew might have absconded with it. He still has one of my Hoogers that he claims he can't find or won't bring back.

In case you missed the post heading title thing up there -
I found some plastic bushings for the burton Plates. They are not all new but work just fine.

[carvedog]

Just a bump still have about half of this stuff.

Make me an offer.

Thx.
Jerry

[Jan]

Still got any bindings left? I'm looking for a cheap set of plate bindings...

[carvedog]

Still got any bindings left? I'm looking for a cheap set of plate bindings...


burton plates for $125 shipped.

[www.oldsnowboards.com]

Did the Sims binding sell?

Funny, I missed this thread completely.

Hooger, wombats, sims shipped to 98661?

Thanks, Bryan

[carvedog]

Did the Sims binding sell?

Funny, I missed this thread completely.

Hooger, wombats, sims shipped to 98661?

Thanks, Bryan

I was hoping to get $100 for the board, $25 for the binders and I really don't see any value to the wombats.

So I was thinking $150 shipped. Every board that I have shipped lately has been $25. So let me know if that works.

Keep on healing up.

Jerry

[www.oldsnowboards.com]

Hi Jerry, Thanks, sounds good!

Consider them sold.


Much appreciated. Bryan

[carvedog]

Done.
You know you are getting a pretty good deal on a great board that just needs a tune?

Thanks.

[Jan]

Carvedog, I sent (or tried to send) you a message, not sure if you got it. I'm interested in the Burton plates if they're in good condition and ready to mount. Are there any missing parts or other issues, and are both 3 and 4 hole disks included?

[carvedog]

Carvedog, I sent (or tried to send) you a message, not sure if you got it. I'm interested in the Burton plates if they're in good condition and ready to mount. Are there any missing parts or other issues, and are both 3 and 4 hole disks included?

Never got any emails from you. I do get PMs from Bombers all the time, including a couple yesterday or day before about my Boulder situation.

I guess I could throw in both types of discs. The plates work. The only piece I cant find right now is one the rubber pads ( very thin ) that go in between the binding and the board. Apparently I didn't even have one under it.

So same price with both sets of discs and you know I can't find one of the rubber pieces, but I am still looking.

[Jan]

Never got any emails from you. I do get PMs from Bombers all the time,...

Huh, well then, the problem is probably at my end. I sent you another PM, if you don't get that one, email me, the address is my name (at) alpha foxtrot november (dot) oscar romeo golf.