HELP needed-Catek World cups-center mounting bolts-best replacements

[powdahbonz]

I picked up a set of catek world cups and want to get new center bolts for the binding mount to the disc(I'm very technical in my speak). They're about 1" length but diameter wise, I'm guessing they're either 14mm or 16mm but I'm not sure. The metal is fairly soft and the allen sets are nearly stripped. I'd like to get stainless or whatever someone could recommend. Anyone know the exact dims. of these bolts

Anyone know what the exact diameter of the center bolts is? Best place to get new ones would be...? Fastenal? or what? I threw them on a FP173 this weekend for a quick spin and was all tweaked out since I'm on raceplates w/unicant on my other fp171 which is beefier and was not set-up at all like I was used too. As I was trying to play around w/ set-up on the hill, started getting concerned w/ the allen stripping out the head beyond all recognition and didn't want to be fubar so went in to get the old dog..thanks for the advice

[crucible]

Email Catek directly, that's what I did and they were able to set me up.

If you're SOL there, then your other options are Mcmaster Carr or Fastenal, but you'll pay more for them.

[cail]

yeah contact Catek directly. Scott can let you know the dimensions... i had them in an email, but apparently i deleted it by mistake.. check McMaster Carr to order them once you have the dimensions (www.mcmaster.com)

[powdahbonz]

Scott at catek is digging around but ordered from fastenal in the meantime-hope they'll fit...like a glove. Thanks for the help