View Full Version : Prior Custom 175!!! (not 165)
NoWeddings.com
November 13th, 2007, 10:35 AM
Listing title wasn't updating (still said 165)... The board is a 175. Here's the original thread with pics et al...
http://www.bomberonline.com/VBulletin/showthread.php?t=17402
west carven
November 13th, 2007, 12:25 PM
howdy greg,
prior says its a 185.
i sent them the specs pic, go figure!
NoWeddings.com
November 13th, 2007, 12:46 PM
I know they made the board, but it's hard to argue with a tape measure. Board is 175.
Also, confirmed the waist...
7.6 in = 19.4cm
Thanks!
D-Sub
November 13th, 2007, 12:49 PM
:lol: you were pretty adamant it was a 165 before, too!
;)
NoWeddings.com
November 13th, 2007, 12:52 PM
No doubt. Being a total newb, I had no reason to doubt what Terry told me.
Again, sorry for the confusion all.
D-Sub
November 13th, 2007, 12:58 PM
Just ribbin ya.
Apparently Terry didnt know either, OR the people who built the darn thing!!!!
hilarious
NOW
on to the REALLY fun stuff, apparently prior doesnt make a 175 anymore :)
it appears as though they have lengthened all models by 2cm, as there is no 185 anymore either...
pokkis
November 13th, 2007, 01:04 PM
I think that 2 extra centimeters are coming from round tail :rolleyes:
dshack
November 13th, 2007, 01:37 PM
Whoa, someone grabbed my avatar. You want to throw down, man?
NoWeddings.com
November 13th, 2007, 02:12 PM
I swear I got it elsewhere, but just put it up today, so I'll yield.
It's brilliant.
D-Sub
November 13th, 2007, 02:19 PM
I think that 2 extra centimeters are coming from round tail :rolleyes:
Why the look? Yes...from the round tail no doubt. I guess that means that most likely the 175 has the same general specs as the current 177
D-Sub
November 13th, 2007, 02:25 PM
most likely specs are 177:
World Cup Race Specs
<!-- begin specs --> <table class="boardSpecs"><tbody><tr class="shaded"> <td>
</td> <td>
</td> <td>
</td> <td>
</td> <td>
</td> <td>
</td> <td>
</td> <td>
</td> </tr> <tr class="shaded"> <td class="rowHeader">Length (cm)</td> <td>157</td> <td>163</td> <td>169</td> <td>173</td> <td>177</td> <td>183</td> <td>187</td> </tr> <tr> <td class="rowHeader">Effective Edge (cm)</td> <td>130</td> <td>136</td> <td>142</td> <td>146</td> <td>150</td> <td>156</td> <td>160</td> </tr> <tr class="shaded"> <td class="rowHeader">Nose Length (cm)</td> <td>21</td> <td>21</td> <td>21</td> <td>21</td> <td>21</td> <td>21</td> <td>21</td> </tr> <tr> <td class="rowHeader">Tail Length (cm)</td> <td>6</td> <td>6</td> <td>6</td> <td>6</td> <td>6</td> <td>6</td> <td>6</td> </tr> <tr class="shaded"> <td class="rowHeader">Nose Width (cm)</td> <td>24.7</td> <td>24.6</td> <td>24.6</td> <td>24.5</td> <td>24.4</td> <td>24.7</td> <td>24.4</td> </tr> <tr> <td class="rowHeader">Tail Width (cm)</td> <td>24.3</td> <td>24.2</td> <td>24.2</td> <td>24.1</td> <td>24</td> <td>24.3</td> <td>24</td> </tr> <tr class="shaded"> <td class="rowHeader">Waist (cm)</td> <td>19.5</td> <td>19.5</td> <td>19.5</td> <td>19.5</td> <td>19.5</td> <td>19.5</td> <td>19.6</td> </tr> <tr> <td class="rowHeader">Radius (m)</td> <td>9</td> <td>9.8</td> <td>10.6</td> <td>11</td> <td>11.9</td> <td>13</td> <td>14</td> </tr> <tr class="shaded"> <td class="rowHeader">Taper (mm)</td> <td>4</td> <td>4</td> <td>4</td> <td>4</td> <td>4</td> <td>4</td> <td>4</td> </tr> <tr> <td class="rowHeader">Insert Setbacks (cm)</td> <td>2.5</td> <td>2.5</td> <td>2.5</td> <td>2.5</td> <td>2.5</td> <td>2.5</td> <td>2.5</td> </tr> <tr class="shaded"> <td class="rowHeader">Stance (in)</td> <td>17"-22"</td> <td>17"-22"</td> <td>17"-22"</td> <td>17"-22"</td> <td>17"-22"</td> <td>17"-22"</td> <td>17"-22"</td> </tr> <tr> <td class="rowHeader">Suggested Rider
Weight Range (kg/lbs)</td> <td>40-65/
90-150</td> <td>50-85/
110-190</td> <td>55-90/
120-200</td> <td>60-95/
130-210</td> <td>60-95/
130-210</td> <td>65-105/
140-230</td> <td>70-110/
155-240</td></tr></tbody></table>
NoWeddings.com
November 13th, 2007, 02:27 PM
With a custom though, couldn't those figures (esp radius) vary drastically?
pokkis
November 13th, 2007, 02:33 PM
If you have serial number in board then you could check speck from Prior
D-Sub
November 13th, 2007, 03:02 PM
With a custom though, couldn't those figures (esp radius) vary drastically?
CRAP! I forgot the custom! That board is a pain in the a--! You should just send it to me and be rid of it!
;)
pokkis is right :rolleyes: is there a serial number?
NoWeddings.com
November 13th, 2007, 03:04 PM
West Craven already contacted Prior and they indicated it was a 185, so I don't trust any of the specs lammed into the board.
SEJ
November 13th, 2007, 04:34 PM
My Prior just had it written with a felt pen. Wiped it down with alcohol and lost everything. Luckily I remembered the waist and sidecut, but the Ser.# is gone for good.
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.