Burton Alp 7.1

[caspercarver]

selling on ebay now, BURTON ALP 7.1, only rode couple of times. very good condition. starting bid is $99.99
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=290069615547&ssPageName=STRK:MESE:IT&ih=019

[SEJ]

Anybody know what the spec.s are on this? Sidecut, waist, etc.

[BlueB]

It should be 10.5 scr, 21.5 waist, no taper.

[Derf]

I just got one this year, the exact same model but I haven't ridden it yet though. Specs are on my webpage.

[SEJ]

Cool web page if I spoke the language.

[crazyboarder]

I need a board just like that.

[dhrracer]

I had two of that excact board had to send both back to Burton.Both boards bases were very concave,from edge to edge there had to be an 1/8" gap between the base and a sraight edge layed across the base from edge to edge.I wouldnt buy another.

[caspercarver]

took item off ebay due to problem noted in quote. i took a straight edge and it was concave thru the center. guess it will hang on the wall for decoration.
I had two of that excact board had to send both back to Burton.Both boards bases were very concave,from edge to edge there had to be an 1/8" gap between the base and a sraight edge layed across the base from edge to edge.I wouldnt buy another.

[Derf]

I'll have to check mine when I get home.:confused:

[boarderboy]

took item off ebay due to problem noted in quote. i took a straight edge and it was concave thru the center. guess it will hang on the wall for decoration.

I'm an Alp devotee and happily ride a 164 that's 1/16 + concave. So might be interested anyway.

(No flaming from the purists, please.)

[Derf]

Got home, checked: 1/16" edge high (concave base).

At the price I got it oand for the use I am going to make of it, I'll live with that.