intecs to upz boots?

[quasi]

got a problem, the screws for my upz heels are to big for the intac heel. Is drilling them out a good option or is there something else?
Thanks Kirk

[D-Sub]

heels usually come with their own screws and t-nuts. Use those.

[bobdea]

yup, the screws and Tnuts come with the intec heels, if not bscurman can tell you what you need, he is the BOL hardware whizard
I'm pretty sure he has memorized the McMaster catalog.

[bschurman]

yup, the screws and Tnuts come with the intec heels, if not bscurman can tell you what you need, he is the BOL hardware whizard
I'm pretty sure he has memorized the McMaster catalog.

Bob, thank you for the glowing praise. Hopefully, I can live up to the pressure now. :-)

For the UPZ boots you must use the tee nuts and screws that came with the Intec heels. If you don't have those, let me know and I'll post the part numbers that you need from McMaster.

->Ben

[quasi]

That would be much appreciated. What is the McMaster catalog.:biggthump

[bschurman]

McMaster-Carr is all things parts at www.mcmaster.com

I believe for your heel tee nuts you will want part number 98965A210. But let me check when I get home on the height of the barrel and see if they are the same.

[quasi]

Thanks for the help guys, yyz Canuck is sending me a kit