TD 2 Step In
SOLD OUT
More coming November 2008
see also TD2 Standard
or TD2 Step In Titanium
We also offer gift
certificates!
Click
to Enlarge
|
It’s time to set a new standard!
- Adjustable Cant and Lift
- Fully Suspended Binding
- 360 Degree Stance Angle
- Indexing System
- 3mm Spacing on Boot Adjustment
- Sold in Pairs
- More fantastic features...
-
NOTE: If you have never had Step In Alpine bindings before,
you WILL need the Intec heels. These are an additional $65
if purchased with the binding.
-
3 HOLE center disks are only necessary if you have a Burton
Snowboard! Evey other Snowboard uses a 4 hole pattern.
-
For help in selecting disks, go
here.
|
With 11 plus years of providing alpine snowboarders with a reliable
and durable ride, Bomber Industries set the standard for quality with
the Trench Digger.
Announcing the Trench Digger Generation 2.
The design of the Trench Digger Generation 2 binding was developed
in a joint venture between Bomber
Industries, Inc. and Bob
Jenney Designs.
It has been almost two years in the making and we are now proud to
offer a snowboard plate binding that delivers a no compromise level
of performance, adjustability, and durability. If you are serious about
laying down the perfect carve, then the TD2 is the ultimate binding
for you!
More details |
Adjustable Cant
and Lift
Choose from three different CANT DISK angles: 0, 3 & 6 degrees
Then adjust the CANT DISK to achieve any combination of Cant and
Lift. More details... |
Enlarge |
3mm Spacing on
Boot Adjustment
The Sole Blocks on the TD2 have precision sizing resolution thanks
to the 3mm spacing for the mounting screws on the SOLE BLOCKS.
The perfect tension in the boot/binding interface is just 3mm’s
away. The TD2 will fit most boots from size M22 to M30. |
More details |
Fully Suspended
Binding
The entire TD2 binding uses a three-piece lower assembly including
a large Elastomer Ring that acts as a suspension system. The E-RING
comes in soft, medium, and hard to allow the rider to tune the
binding to suit their riding style. More
details... |
Enlarge |
360 Degree Stance
Angle
The TD2 has 360 degrees of rotation for a precise stance angle
and infinite positioning. You want 58.6 degrees on your rear foot,
and 61.3 degrees on the front? You got it! Extra large M8 screws
will lock you into position. |
More details |
Indexing System
Delivers easily readable and quantifiable adjustments via the
precision laser engraved markings on the CENTER DISK and the BASE
PLATE. The indexing system allows you to precisely set your desired
stance angle and cant/lift angle. More
details... |
Enlarge |
Polished and
Laser Engraved Parts
We spared no expense making sure these beauties looked their best
on your favorite stick. Highly polished parts and deep color anodizing,
give the TD2 the shine and luster of a work of art. All graphics
and adjustment numbers are laser engraved for a binding that will
look great long after you do. |
 |
Strong and Light
Weight
The TD2 is built with high-grade aluminum/stainless steel and
machined at the Bomber Industries
factory for the highest level of quality control. The TD2 is a
full 1/3 lbs (150g) lighter (per set) from its predecessor, the
TD1, with no loss in performance. The TD2 maintains that perfect
Bomber feel. More binding, less weight, everyone wins. TD2 Step-in
(w/3 degree disk) = 3.35 lbs / 1520g per set. |
Enlarge |
Lug to Bail Interface
with 30% Stronger Return Spring
Bombers patented lug interface at the ends of the beefy 1/4”
(6.35mm) bails guarantees a solid and strong connection to the
board. It also allows for Micro-Adjustment of the bail tension
if needed. The TD2 torsion return spring is now 30% stronger than
found in the TD1. Those bails now stand at attention no matter
what the conditions are. |
Enlarge |
3 and 4 Hole Compatibility
Works for both the three hole and four hole patterns found in
almost all snowboards. Specify which one you want at the time
of purchase. |
 |
All 5mm Allen Socket Hardware
/ One Key Does it All
All fasteners on the TD2 are high grade stainless steel and are
adjusted via the provided 5mm Hex Key. Maintaining the one-tool
approach required us to invest in expensive custom fasteners.
But, it is worth it. All you need is one 5mm Key and you can mount
or make any adjustments.
|
5 Year Warrantee & Full Parts Support: We trust
our products so much, we back up the TD2 with the best warrantee in
its class: 5 years from date of purchase. We also have full parts support
in the Bomber Store if you need something fast.
All TD2 bindings come complete with: bindings, mounting hardware, leash,
5mm Hex Key, and detailed instructions.
TD2 bindings function properly ONLY with DIN standard boots.
TD2 instructions now available
online.
Available accessories for the TD2 can be found here.
For TD2 Dealers, go here.
More Bindings...
